13 Aug Automatic glue dispensing machine material management

The cleaning of adhesive materials such as glue and glue valves is a simple and indifferent hub in the dispensing and packaging process of automatic dispensing machines and glue filling machines, which plays an important role in dispensing and packaging. Why does every employee have to clean the adhesive material of the automatic dispensing machine under the skills of Shenzhen Chuangying Era?

Initially, the dispensing and filling machines had to be operated appropriately in terms of dispensing volume and dispensing time during the packaging process. In order to ensure that the glue in the dispensing hose flows out of the dispensing needle successfully, it is necessary to verify the essence and viscosity of the glue to clarify the technique of the glue valve, dispensing temperature, dispensing pressure, dispensing rate, etc. After setting, it is necessary to measure the dispensing flow rate to see if it meets the packaging requirements. For those that do not meet the packaging requirements, it is necessary to conduct secondary mediation on some factors mentioned upstream. Normal flow measurement errors should be kept within plus or minus 2%. In the packaging process of automatic dispensing machines and glue filling machines, when the glue in the hose is lower than the demand during machine operation, the demand for replacing the hose will be more stable.

Before packaging and using glue dispensing and filling machines, it is necessary to check the expiration date of the glue and adhesive materials to see if they are better than the expiration date. If it is found during the packaging process that the adhesive material is better than its expiration date, it is necessary to thoroughly clean and dry the dispensing valve and dispensing pump to ensure the elimination of expired adhesive material, avoid contaminating new adhesive material, and prevent it from becoming a quality defect in the dispensing product.